Profile of Von_Smedman

Avatar Area

Offline Unknown SteamID unknown
Posts: 108

General Information
Game Name: Von_Smedman


Thread: Bug splat in worldbuilder!29 Jun 2015, 13:34 PM Jump back to quoted post29 Jun 2015, 13:25 PMVon_Smedman Yes!, the problem is that I have been working on the map for 4 weeks, with no problems. Then this bugsplat error came up after a save. I have tried , to stamp the map and copy it in to a new map to try to delete any error, but still the same problem. I can save the first time after some modding on the map and it is fine, but second time I try to save it will come up with the bugsplats rapport. Please try to see if you get the same error using worldbuilder. Downloade the map from stream http://steamcommunity.com/sharedfiles/filedetails/?id=395356279 Now try to put a building,tank or tree anyway on the map, then try to save the map. Either it will do it the first time or come up with the bugspalt error. Now try a second time to place a building, tank or tree and then save, then bugsplats error comes up. Is it my software? I have tried to reinstall stream, worldbuilder , but with no fix to this problem. hope you can help me. best regards Von Smedman In: Mapping Discussion
Thread: Bug splat in worldbuilder!29 Jun 2015, 13:25 PM Jump back to quoted post5 Jun 2015, 13:43 PMViper86ed Have you been able to save the map before? Yes!, the problem is that I have been working on the map for 4 weeks, with no problems. Then this bugsplat error came up after a save. I have tried , to stamp the map and copy it in to a new map to try to delete any error, but still the same problem. I can save the first time after some modding on the map and it is fine, but second time I try to save it will come up with the bugsplats rapport. Please try to see if you get the same error using worldbuilder. Downloade the map from stream http://steamcommunity.com/sharedfiles/filedetails/?id=395356279 Now try to put a building,tank or tree anyway on the map, then try to save the map. Either it will do it the first time or come up with the bugspalt error. Now try a second time to place a building, tank or tree and then save, then bugsplats error comes up. Is it my software? I have tried to reinstall stream, worldbuilder , but with no fix to this problem. hope you can help me. best regards Von Smedman In: Mapping Discussion
Thread: Bug splat in worldbuilder!3 Apr 2015, 13:32 PM Hi coh2.org, I have this problem with bug splat when I try to save my map inside worldbuilder. I have work on the map for 4 weeks with no problems. My solution has been: Reinstall steam, coh2 to see if this help, it did not. I have tryto stamp the map inside worldbuilder and then put it in a new map. This has not help. Dos anybody have had this problem, I have send over 30 bug splat rapports to relic, but no solution had been given yet. you can fin the map here, so try to open it in worldbuilder f, and then try to put a building on it and then save. Then bug splat will come up. http://steamcommunity.com/sharedfiles/filedetails/?id=395356279 could it be that some of the buildings and items in coh2 has an error? I am running windows 8.1,intel i7-4700mq 2300hz processor, and 8 gb ram, and a 765m Nvida graphic card. best regards Kristian In: Mapping Discussion
Thread: Bug splats error when saving work in Worldbuilder!20 Feb 2015, 12:01 PM Hi I get this bug splats error on my map after been working for a month on it with no problems. The error bug splats comes up when saving and I get kick to the desktop, and all my work is lost. Solution: I have try to stamp the map, in to a new, but still the same problem. I have reinstalled COH2 , 2 times now, still the same problem. you will find the map here: The map is here Using windows 8.2 and graphic card GTX765M, I7 -4700mq processor 2.40Ghz. Please help me with a solution, it is so sad to lose work on this map. In: Mapping Discussion
Thread: Worldbuilder Crashes, when saving work. 1 Dec 2014, 18:45 PM Jump back to quoted post1 Dec 2014, 16:33 PMSirlami Have you tried to run world builder in administrator mode? Also it might be that your map is corrupted, i have lost one map to this bug Thanks, I have tried to Stamp the map and then open a new one and then copy in that stamp, it work the first time, but then I try to work in the map and then when I save it, the same problem can up. Bug Splat...., I have used so many hours on this map. I hoped it will be fix. Can you have to many roads and splits on the map? best regards Kristian In: Mapping Discussion
Thread: Worldbuilder Crashes, when saving work. 1 Dec 2014, 08:16 AM Hi Coh2 community, I have this issue that Worldbuilder wont save the work I have dont for some reason. I have had the worldbuilder install since june 2014 and it have work fine, but now suddenly when I try to save my work yesterday on a map, I have been working on for 1 month, it crashes out to windows desktop. I try to save the map under a different name (save as XXXX) and when this is don, it works 1 out of 5 try, but if I then open that file name (XXXX) that I save and work a bit in it and then push save it crashes again, on to Windows Desktop. What is happening? I allso try to chance the file folder , to see if there is a corrupted area on my hard disk, but still same issue as on top. Have anybody have experiences this problem? best regards Von Smedman In: Mapping Discussion
Thread: Map Russian railway station30 Aug 2014, 08:52 AM Hi, I need to get your jugement om this map, is the medic center and repair center in fair distance from each player and is the radar station okay where they are. And is the abandon t34-76 to much or just a fun adiccion. - How is the sectors , tryed to make some of them importence to capture as they can cut off supplys, http://steamcommunity.com/sharedfiles/filedetails/?id=306012582&searchtext=russian+railway would love to get some fedback. best regards Kristian In: Map Sharing
Thread: How to make a custom loading picture!26 Aug 2014, 07:01 AM Hi I have been reading a lot on this great site and there are a lot of good inputs to how to get a custom loading picture/screen. This is what I have done. I have choose a picture and then saved it as TGA at 24-bit in Photoshop. Then I have given the file the mapname_loading_background, and put the file in the folder where my map is. Then I loading the map in worldbuilder and Export it , this should as far as I can see get the picture in the loading screen. But, nothing happens. ...still standard loadingscreen for custom maps. Can anybody help me out here, is there something that I have missing. Question, should the picture have the same name as the mapname.sga or as mapname.mm, the mapname.SGA is the map you load in worldbuilder and the mapname.mm is the name you give the map with in worldbuilder, and that is the name that you can see on steam. In: Mapping Discussion