First off, good job on the last patch!
Now, we know MGs got buffed yadda yadda and smoke barrages are a suggested counterplay.
Mortar smoke barrages look cool as hell and for the old factions they are the only nondoctrinal way to work with smoke.
But they are too slow.
Please crank up the speed and make them deploy faster form click to a smoke wall so we can use them dynamically in tank batte etc!
RELIC please make MORTAR SMOKE barrages quicker
28 Jul 2015, 23:00 PM
#1
Posts: 162
28 Jul 2015, 23:27 PM
#2
Posts: 3103 | Subs: 1
I'd start with fixing the bug that causes them to not fire and then make the smoke apply along a line you choose fairly reliably, like a Walking Stuka barrage.
Then, maybe make em' faster. But I'd be very happy if just the first two happened already.
Then, maybe make em' faster. But I'd be very happy if just the first two happened already.
29 Jul 2015, 04:11 AM
#3
Posts: 446 | Subs: 2
Yes, this is good.
I have never seen OST use smoke ever, likely because I am a scrub.
But also because mortar smoke is just way too slow.
I have never seen OST use smoke ever, likely because I am a scrub.
But also because mortar smoke is just way too slow.
Dear Lord, teach me to be generous; to give and not count the cost; to fight and not heed the wounds; to work and ask for no reward, save that of knowing I am doing Your will.
Argumentation, disagreement, and debate are critical for success.
The most important type of diversity is viewpoint diversity.
Argumentation, disagreement, and debate are critical for success.
The most important type of diversity is viewpoint diversity.
29 Jul 2015, 04:35 AM
#4
Posts: 2561
Yes please! They just need to increase projectile speed to make it a bit more responsive.
29 Jul 2015, 08:57 AM
#5
Posts: 509
+1 absolutely. Fix the bug. Make them fire in a line. And quicker. Absolutely.
29 Jul 2015, 09:26 AM
#6
Posts: 2819
Absolutely.
Smoke barage is freakin' awesome, but not used that much cause of the extremely slow execution.
I think you can use them already perfectly for attacks, but for getting out of sticky situations, it's too slow.
+1
Smoke barage is freakin' awesome, but not used that much cause of the extremely slow execution.
I think you can use them already perfectly for attacks, but for getting out of sticky situations, it's too slow.
+1
All posts made are about situations in 2v2's. Not a 1v1 player.
29 Jul 2015, 09:27 AM
#7
Posts: 1605 | Subs: 1
+1
Nothing more to add here.
Nothing more to add here.
29 Jul 2015, 09:44 AM
#8
Posts: 2635 | Subs: 4
Permanently Banned+5
Relic killing our game, lets save COH2 from Relic 
If you're not a ахіs lover when you're 20, you have no heart. If you're not a soviet fanboy by the time you're 30, you have no brain.
Relic delenda est
If Dane will be have son, he will be call him (Sturmgeschütz)
Brotheres, what we do in coh2, ehoes in eternity
If you're not a ахіs lover when you're 20, you have no heart. If you're not a soviet fanboy by the time you're 30, you have no brain.
Relic delenda est
If Dane will be have son, he will be call him (Sturmgeschütz)
Brotheres, what we do in coh2, ehoes in eternity
29 Jul 2015, 09:51 AM
#9
Posts: 1534 | Subs: 1
+1
29 Jul 2015, 09:53 AM
#10
Posts: 35
+1, bug fix, faster.
For my part, not line deployment, too much of a 1 click counter to too many things.
For my part, not line deployment, too much of a 1 click counter to too many things.
29 Jul 2015, 09:53 AM
#11
Posts: 710
+1
Go ahead Relic. You may proceed.
Go ahead Relic. You may proceed.
29 Jul 2015, 10:23 AM
#12
Posts: 390 | Subs: 2
+1
29 Jul 2015, 10:37 AM
#13
Posts: 91
Yep, very needed fix. I like to use smoke barrage but sometimes its so slow that i attack without smoke support.
29 Jul 2015, 10:41 AM
#14
Posts: 1701
Yep, very needed fix. I like to use smoke barrage but sometimes its so slow that i attack without smoke support.
Agreed, never seen OST smoke ever lol.
PD: Welcome to the forums
Blaue Division - The best corp
BPX - Black Phoenix, Clan leader.
BPX - Black Phoenix, Clan leader.
29 Jul 2015, 10:45 AM
#15
Posts: 656
I believe a lot of the delay comes from the mortar having to reface or set up again to fire the smoke barrage. Not a lot can be done about that but it would be nice if relic made the smoke fire instantly once the mortar was in the correct position.
29 Jul 2015, 23:42 PM
#16
Posts: 12
I'll play devil's advocate. Instead of using smoke defensively (hence not being able to stop a pin from an advanced MG), you use smoke offensively. So for example one unit scouts out the MGs position, then fire the smoke, then move up the rest of the troops.
For what it's worth I think the mortars have to load a different type of ammo to shoot the smoke, which also adds to the delay (I could be wrong here).
For what it's worth I think the mortars have to load a different type of ammo to shoot the smoke, which also adds to the delay (I could be wrong here).
30 Jul 2015, 02:08 AM
#17
8 Posts: 2470
it's even worse when the mortar is suppressed. i triggered it on a house with a maxim in it, went away for 10 seconds and came back to see no smoke and the mortar firing. turned out it was the first shell.
30 Jul 2015, 02:44 AM
#18
Posts: 879
Maybe a few seconds faster. It gives you just enough time to see the smoke and re-position an MG, any faster and it will not give the MG user the opportunity to re-position and set-up.
While we're at it, can we please let US Shermans fire smoke on the move? This has been a pet peeve of mine since alpha.
While we're at it, can we please let US Shermans fire smoke on the move? This has been a pet peeve of mine since alpha.
30 Jul 2015, 03:03 AM
#19
Posts: 179
One idea I had was that the mortar team actually shows its field of fire, much like an MG team. The constant need to re-position because the angle isn't quite right really slows this unit down in a way that dulls its effectiveness.
Firing smoke in a line is a great idea, and in combination with the above change, would allow you to actually make an infantry push or flank under smoke. And please, please fix the "no-fire" bug that's been lingering.
Firing smoke in a line is a great idea, and in combination with the above change, would allow you to actually make an infantry push or flank under smoke. And please, please fix the "no-fire" bug that's been lingering.
30 Jul 2015, 03:07 AM
#20
Posts: 2053
While we're at it, can we please let US Shermans fire smoke on the move? This has been a pet peeve of mine since alpha.
They DO fire on the move, its just that activating the ability halts the tank, meaning you have to recommand it to move.
1 user is browsing this thread:
1 guest
Livestreams
 |
|
|
76 | ||
 |
|
|
40 | ||
|
|
|
|
37 | ||
 |
|
|
147 | ||
|
|
|
|
20 | ||
|
|
|
|
14 | ||
 |
|
|
4 | ||
|
|
|
|
3 | ||
|
|
|
|
2 | ||
|
|
|
|
1 |
Ladders Top 10
-
#Steam AliasWL%Streak
- 1.831222.789+37
- 2.600215.736+15
- 3.34957.860+14
- 4.1107614.643+8
- 5.305114.728+1
- 6.916405.693-2
- 7.273108.717+24
- 8.722440.621+4
- 9.1041674.607-2
- 10.17146.788+1
Data provided by
Relic Entertainment
Relic Entertainment
Replay highlight
VS
-
cblanco ★ -
보드카 중대
-
VonManteuffel -
Heartless Jäger
Einhoven Country
Honor it
9
Download
1235
Board Info
923 users are online:
923 guests
0 post in the last 24h
8 posts in the last week
37 posts in the last month
8 posts in the last week
37 posts in the last month
Registered members: 49104
Welcome our newest member, zhcnwps
Most online: 2043 users on 29 Oct 2023, 01:04 AM
Welcome our newest member, zhcnwps
Most online: 2043 users on 29 Oct 2023, 01:04 AM