Profile of nemO

Avatar Area

Offline Unknown SteamID unknown
Posts: 8

General Information


Thread: Walkable terrain objects28 Oct 2015, 15:28 PM Thanks . . will try it out. In: Mapping Discussion
Thread: How to trigger Action Markers?28 Oct 2015, 15:26 PM Hi . . re: your question 2 - yes. Select markers (little red flag icon). Select action markers (top right of the action panel). Right click on land. Select action marker. Select edit action. Change your time to whatever. Select your action. Apply changes. Re: question 1 - dunno. In: Mapping Discussion
Thread: Walkable terrain objects22 Oct 2015, 20:16 PM Hi . . Could someone point me to how I can use walkable objects? By this I mean objects that are above the ground and are defined in the objects list as walkable. e.g. I selected from the original list (and used a stamp from 'german industry test map' that someone put up), walkable pipes, i.e. fuel pipes that have a walkway on top of them and are defined as walkable (objects/industrial/metal/large_pipe_walkable). They are defined as non-passable in the impasse editor on the map (i.e. red - but not a huge thing as buildings are as well), however no matter how I section off the area with bad impasse that I test to try to make the units use the walkway, they won't. There is no switches that I can find in the 'edit state' apart from health and destroy and using a simple deformation tool to make a gradient won't work - I want to use the model of the stairs, not create trick steps into the landscape, plus it would just look very silly and after all, it does say walkable. Any ideas/directions, as I would like to use other items that are defined as walkable as well, i.e. catwalks etc and if I can get this to work, the others should be okay. Ta. In: Mapping Discussion
Thread: Water (terrain properties)14 Oct 2015, 21:59 PM As a follow up . . how it looks (with a bit of tweaking) in game. First iteration - http://imgur.com/9vPVJBx It's really only my first time using this builder and it's quite an interesting tool, fun though. Keeping in mind what others have said about performance being affected by splats, splines etc, the 2nd iteration will be converting these items (that I have initially used) to paint tile textures instead. A bit more intensive unfortunately (and you're limited to only 8 textures per tile) but hopefully it will decrease any latency issues, especially if I want to be this detailed throughout the map. We shall have to see how it goes oh and just for info this little diaorama will be in the map. I always found that areas should have something (anything) to engage the user while they are doing so. Yes, it is simply a game about about little skinned models blowing the crap out of each other but if you take that thought and twist it to immerse the user, you always get that little bit of latent realism. In: Mapping Discussion
Thread: Water (terrain properties)10 Oct 2015, 12:48 PM Thanks . . I assumed that using those would have preset the colours within the palette but no . . so I started playing around with the actual colours on the palette. In case others need it (or want to play with it), I went into 'Water Colour', 'More Colours' and picked HUE: 18, SAT:38, LUM: 39, RED: 48, GREEN: 41, BLUE: 35 and then finally set depth to zero. This gives you a nice deep brown silt river Again, thanks for the steer. In: Mapping Discussion
Thread: Water (terrain properties)9 Oct 2015, 22:05 PM Hi . . I'm having a little problem with water terrain features and for the life of me can't work out why it won't work so any help would be appreciated. When I put in a water tap, no matter what I try I can't get it to set to the features I want. I have attached a quick screen grab - the arrows highlight what I want it to do but it won't change type or colour, instead keeping transparent. I could put a huge amount of effort into painting the riverbed (and splats, textures etc) but it still won't be the same. http://imgur.com/DeZQjzv Any ideas? [edit] = I had to put in the link as it wouldn't show it within the post . . In: Mapping Discussion
Thread: World builder3 Oct 2015, 09:27 AM Jump back to quoted post2 Oct 2015, 19:42 PMnemO Hi . . I have the same problem (details below) and have reinstalled the complete game (including the different factions), Win7, SP1 and my graphics drivers. I was able to open and use it previously but it simply does not open at all anymore (says it has stopped working). Any further ideas? -- Problem signature: Problem Event Name: APPCRASH Application Name: WorldBuilder_CoH_2.exe Application Version: 4.0.0.19696 Application Timestamp: 56035973 Fault Module Name: WorldBuilder_CoH_2.exe Fault Module Version: 4.0.0.19696 Fault Module Timestamp: 56035973 Exception Code: c0000005 Exception Offset: 001f49f9 OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 2057 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789 Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt Did another entirely fresh install of SP1 and it now appears to be working. I also had to go up to NVIDIA driver 352.86 (not the earliest one you suggested) as well. Can I suggest that the developers re-align and update their driver requisites in order to keep it as futureproof as possible? In: Mapping Discussion
Thread: World builder2 Oct 2015, 19:42 PM Hi . . I have the same problem (details below) and have reinstalled the complete game (including the different factions), Win7, SP1 and my graphics drivers. I was able to open and use it previously but it simply does not open at all anymore (says it has stopped working). Any further ideas? -- Problem signature: Problem Event Name: APPCRASH Application Name: WorldBuilder_CoH_2.exe Application Version: 4.0.0.19696 Application Timestamp: 56035973 Fault Module Name: WorldBuilder_CoH_2.exe Fault Module Version: 4.0.0.19696 Fault Module Timestamp: 56035973 Exception Code: c0000005 Exception Offset: 001f49f9 OS Version: 6.1.7601.2.1.0.256.1 Locale ID: 2057 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789 Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt In: Mapping Discussion