Login

russian armor

Start up call-ins

21 Sep 2019, 04:38 AM
#1
avatar of Adler

Posts: 44

I am interested in adding the WC51 & a Bren carrier to starting forces. (I have don halftracks & a scout car for the Germans & Soviets. No problem with the garrison of an engineer squad etc. The problem I have is that vehicles for UK & USA start inside their base & cant leave. I was thinking a call-in vehicle for them, but cant fathom how. (I am sure OKW used to have an SWS arrive.

Any ideas or insights would be appreciated.

I have tried army/start actions/spawn squad... but it either appears in the middle of the base or the middle of the map.
21 Sep 2019, 07:37 AM
#2
avatar of SneakEye
Senior Modmaker Badge

Posts: 817 | Subs: 5

This is how the sws truck is spawned:
21 Sep 2019, 23:43 PM
#3
avatar of Adler

Posts: 44

Still not firing... thanks for the idea though.
22 Sep 2019, 14:05 PM
#4
avatar of SneakEye
Senior Modmaker Badge

Posts: 817 | Subs: 5

I accidentally used the wrong unit_type in this example. The unit_type (3rd row from the bottom) should be 'hq'.

Sorry :blush:
22 Sep 2019, 21:46 PM
#5
avatar of Adler

Posts: 44

I was on to that, it didn't work, I tried quite a few. Do you have working?
23 Sep 2019, 08:28 AM
#6
avatar of SneakEye
Senior Modmaker Badge

Posts: 817 | Subs: 5

Yes this image is from an ability in my mod.

Another idea: use the reinforcements_action directly in the action_apply from your hq, without the filter_action.

This will run every time the structure spawns or is rebuild though. You can put the action in a requirement_action which requires NOT a player upgrade. Then add that upgrade at the end of the action. That way it will only run once.
26 Sep 2019, 07:10 AM
#7
avatar of Adler

Posts: 44

Finally got it!

Had to tack it on in the HQ building to an action_apply/actions/delay/ & then add it after a scar function. It wouldn't work with out the scar???

Thanks for your help sir.
26 Sep 2019, 07:33 AM
#8
avatar of SneakEye
Senior Modmaker Badge

Posts: 817 | Subs: 5

Good job! Glad I could help :)
I guess that scar function sets the rally point, which is used as target point for the spawned squad.
30 Sep 2019, 05:59 AM
#9
avatar of Adler

Posts: 44

I see you have a mod that changes the US base. Salute!

I have made a Hungarian base stamp for a new mod I am working on, but am at a loss as how to get it in game. I have tried adding to data/art/stamps just like .apb files but no joy.

Should I be using a stamp or another method?
30 Sep 2019, 06:21 AM
#10
avatar of SneakEye
Senior Modmaker Badge

Posts: 817 | Subs: 5

Adding stamps is not possible as far has I know. I use an existing HQ which applies spawn_entity for all new objects. At the end the HQ will be deleted by a make_death action.
30 Sep 2019, 06:37 AM
#11
avatar of Adler

Posts: 44

OIC, I could see the Brit layout... is there a way to use the US base, but with Russian or ost heer buildings & not write over the US?

And thanks for your help as always. It takes me days trying 30 different ways to give up on the stone wall.
30 Sep 2019, 07:23 AM
#12
avatar of SneakEye
Senior Modmaker Badge

Posts: 817 | Subs: 5

I think it should be possible, with a workaround. Set the US base stamper in army_ext. Then clone the 4 US tier structures. In action_apply, add a requirement_action that checks on the race. Then the action can spawn a new entity of your choice. At the end, with a delay of 0.1, kill the original US structure. You can use this for each structure and the US base should still work due the race check.
19 Oct 2019, 01:32 AM
#13
avatar of Adler

Posts: 44

I might need some of your pics to walk me through this if you are able. I confess to be struggling at this point. Trust you had a good week away.
19 Oct 2019, 08:12 AM
#14
avatar of SneakEye
Senior Modmaker Badge

Posts: 817 | Subs: 5

Start with changing the stamper:
All examples are from my usf base mod, so you need to use the US stamper instead of the Brit.

Then you want to edit all 4 usf base buildings like this:
You need to add a 'spawn_entity' action with your own Wehrmacht structure before the delay. And change the required race to Wehrmacht. That way the US won't change and the Wehrmacht starts with its own structures.

You need to think about the layout though, because the Wehrmacht structures are bigger and there are 5 of them. I have no idea how you want to fit them all in the US circle. But you can toy around with the x and z coordinates in spawn_entity to move them a little.
23 Oct 2019, 21:43 PM
#15
avatar of Adler

Posts: 44

Ta! I will keep fiddling... I think I enjoy mod'ing this game more than I enjoy playing it :D
29 Oct 2019, 00:57 AM
#16
avatar of Adler

Posts: 44

Got it going... couldn't have done it without you! Tanks. :P

Is there a way to delete some of the clutter from in the base, as in say delete some sandbags from around the OKW HQ truck etc?
29 Oct 2019, 09:47 AM
#17
avatar of RagnarTheGamer
Master Modmaker Badge

Posts: 317

jump backJump back to quoted post29 Oct 2019, 00:57 AMAdler
Got it going... couldn't have done it without you! Tanks. :P

Is there a way to delete some of the clutter from in the base, as in say delete some sandbags from around the OKW HQ truck etc?


You can't delete one sandbag. You would have to remove everything that is around it because it is a part of a stamper. To remove it jist go to the OKW hq and remove it from the action apply extention.
30 Oct 2019, 06:22 AM
#18
avatar of Adler

Posts: 44

Problem de jour... I am trying to replace the US MG nests with Flak.

When I spawn an entity, it appears in the correct spot, but doesn't load the sbps so I have an unusable placeholder.

If I spawn a squad... it appears slightly offset & blocks a valuable exit point to the US base.

I have tried everything, including trying to build an entity only flak.

Any pointers from the sages?

Image link https://www.dropbox.com/s/h9ooe56v0u7wsw1/hungarian_base.jpg?dl=0

30 Oct 2019, 07:16 AM
#19
avatar of SneakEye
Senior Modmaker Badge

Posts: 817 | Subs: 5

The best solution would be to use an entity only, without squad. You could try to clone the us mg nest, then change the blueprint_ext and combat_ext. I will also experiment with this to provide an useful answer ;)
31 Oct 2019, 20:21 PM
#20
avatar of SneakEye
Senior Modmaker Badge

Posts: 817 | Subs: 5

I created an entity only flak: https://www.dropbox.com/s/djxq4kaq7kdaqpl/flak_emplacement_entity.xml?dl=0

In short:
- removed the link in on_construction_squad
- added crew_ext
- removed recrewable_ext
- removed team_weapon_ext
1 user is browsing this thread: 1 guest

SHOUT IT OUT!

No ProfanityNumber of ShoutsRefresh Shout Box
Rosbone: @aerafield You would be surprised by how many people are into genital mutilation :snfPeter:
Last Tuesday, 21:22 PM
aerafield: @LimaOscarMike I would say nowadays is a decent time to try CoH3. If you loved CoH2 however, there is a solid chance you're gonna dislike CoH3
Last Monday, 17:04 PM
LimaOscarMike: My laptop can't even run COH3. Should I get them on my Series X or is it dead yet?
Last Saturday, 05:10 AM
Rosbone: One of my last major gripes about Coh3. Price is still too high I feel for growth. But progress is always good.
Last Saturday, 04:43 AM
Rosbone: I am not 100% sure but I think Relic actually fixed up the skirmish menus a little last patch. If so, thank you and keep it coming.
Last Saturday, 04:39 AM
Osinyagov: Suddenly, coh2 is slowly dying, but you can play it, playerbase still big enough
09 Apr 2025, 17:00 PM
Osinyagov: Wow, i remember you from zansi and vali videos, good old memories
09 Apr 2025, 16:58 PM
Beinhard: o7 miss this game and zansi
09 Apr 2025, 14:09 PM
Lady Xenarra: @Willy Pete The lack of April Fools this year is odd lol
02 Apr 2025, 01:34 AM
Willy Pete: @Rosbone not dead yet. when that happens the font will switch to Papyrus :*(
02 Apr 2025, 00:16 AM
dasheepeh: it was an honor guys :guyokay:
01 Apr 2025, 20:34 PM
aerafield: yeah I already prepared my "Can't believe there's comic mode for the 10 daily visitors even on this April 1st" :guyokay:
01 Apr 2025, 20:29 PM
Rosbone: @dasheepeh I guess that means this site is officially dead :guyokay:
01 Apr 2025, 20:19 PM
dasheepeh: no comic sans font for april 1st this year?
01 Apr 2025, 19:56 PM
Willy Pete: @Lady Xenarra this you? https://i.imgflip.com/3e4thi.jpg
01 Apr 2025, 02:53 AM
Lady Xenarra: Does anyone else think that USF needs buffs? It feels like they’re on life support sometimes
01 Apr 2025, 02:36 AM
Willy Pete: @Rosbone Ahh I missed that memo. I still think its a bad decision though. Adds frustration for players and isnt gonna make them that much money
27 Mar 2025, 15:46 PM
Rosbone: It is also good they left it free until after the free to play weekend. Points for that.
27 Mar 2025, 09:34 AM

Livestreams

Australia 31
Russian Federation 186
unknown 11
Sweden 6

Ladders Top 10

  • #
    Steam Alias
    W
    L
    %
    Streak
Data provided by Relic Relic Entertainment

Replay highlight

VS
  • U.S. Forces flag cblanco ★
  • The British Forces flag 보드카 중대
  • Oberkommando West flag VonManteuffel
  • Ostheer flag Heartless Jäger
uploaded by XXxxHeartlessxxXX

Board Info

246 users are online: 246 guests
3 posts in the last 24h
7 posts in the last week
32 posts in the last month
Registered members: 53952
Welcome our newest member, Katerins
Most online: 2043 users on 29 Oct 2023, 01:04 AM