Hi guys,
I have a GTX590 and the FPS is not good enough at 1920x1200. I am trying to increase it to be a stable 60FPS, but every option I touch barely impacts the FPS. I turn everything down to low and change resolution to 1280x800 and it is still within the same ballpark FPS range. How is this possible that nothing is impacting the FPS? Thanks.
Increasing FPS
7 Jun 2013, 23:20 PM
#1
Posts: 4
8 Jun 2013, 00:19 AM
#2
Posts: 331
is it maybe an internet problem, or are you doing the normal benchmark/whatever?
8 Jun 2013, 01:12 AM
#3
Posts: 48
Same graphic card here.
Problem is; nVidia doesn't seem to be in a hurry to give us the coh2 sli profile.
You can experiment with "force alternate image rendering 2" in your driver panel, to get a taste of how the game will probably perform once proper driver will be released. Just be careful not to get blind or epileptic with the screen flickerings.
Problem is; nVidia doesn't seem to be in a hurry to give us the coh2 sli profile.
You can experiment with "force alternate image rendering 2" in your driver panel, to get a taste of how the game will probably perform once proper driver will be released. Just be careful not to get blind or epileptic with the screen flickerings.
8 Jun 2013, 01:20 AM
#4
Posts: 48
If any Relic guy see this post: can we have info on this subject ? Usually nVidia is quite fast at releasing sli profile.
It's a shame that every sli user unaware of how their stuff works think your game runs like crap...
It's a shame that every sli user unaware of how their stuff works think your game runs like crap...
8 Jun 2013, 02:47 AM
#5
Posts: 331
Is he using sli?
8 Jun 2013, 03:53 AM
#6
Posts: 52
Is he using sli?
GTX590 is a dual-GPU card, so yes, he is.
8 Jun 2013, 08:23 AM
#7
Posts: 960
...How does this keep happening to people. I use 2x 570s, and using only 1 I get 90-something, even at the highest settings (with no AA) @ 1080p.
What CPU are you using?
What CPU are you using?
Opinions reflect all team modes (not 1v1)
I often edit my posts several times after posting
I often edit my posts several times after posting
8 Jun 2013, 08:35 AM
#8
4 Posts: 505
I was using two 570's but had to turn one off due to the flickering.
I gotta say that when I went into the video settings menu and used detect settings option it gave me mostly medium settings and a single high setting (I think on texture quality). When I did the benchmark I came out with an average of 45 FPS.
When I threw caution to the wind however and turned everything up (like Doomlord said, without AA) I only lost about 5 FPs in the average so I decided to play a game anyway. when in the game I was constantly close to high 60s in terms of FPS. So I dont find the benchmarking tool in the game to be the most representative of how it will play. I cant speak for single player, but I've had no problems even on a single 570 in multiplayer.
I gotta say that when I went into the video settings menu and used detect settings option it gave me mostly medium settings and a single high setting (I think on texture quality). When I did the benchmark I came out with an average of 45 FPS.
When I threw caution to the wind however and turned everything up (like Doomlord said, without AA) I only lost about 5 FPs in the average so I decided to play a game anyway. when in the game I was constantly close to high 60s in terms of FPS. So I dont find the benchmarking tool in the game to be the most representative of how it will play. I cant speak for single player, but I've had no problems even on a single 570 in multiplayer.
8 Jun 2013, 20:09 PM
#9
Posts: 2
multiGPU won't help CoH2.
If you want a higher framerate usually that will take a fast CPU.
If you want a higher framerate usually that will take a fast CPU.
8 Jun 2013, 20:34 PM
#10
Posts: 48
You are wrong kind sir. Evidence of forcing sli via drivers says so (+40% fps on my system).
If you were right, this would be the most cpu bottlenecked game ever.
If you were right, this would be the most cpu bottlenecked game ever.
8 Jun 2013, 21:00 PM
#11
Posts: 2
Glad to hear that! What resolution/snow detail do you run at? What kind of CPU do you have?
8 Jun 2013, 21:37 PM
#12
Posts: 48
Except 100% world resolution I've put everything on low by default for now, assuming it's not worth tweaking for a few FPS with those gimped drivers. Playing in 1920*1200.
got an i7@3.6ghz / 590 gtx / 6g ram.
got an i7@3.6ghz / 590 gtx / 6g ram.
8 Jun 2013, 22:03 PM
#13
1 Posts: 2075 | Subs: 2
Turn off Vsync and see if that helps.
10 Jun 2013, 03:49 AM
#14
Posts: 101
download notepad++
then go to mygames/companyofheroes2/configuration_system.lua
open it with notepad++
now you have full access to all graphic options
*means use the config file to change
best way to boost fps:
-*turn effects fidelity and density to 0
-*you can turn snow effects off by putting snow quality to 0, but this will remove all tracks
-turn off vsync
-lower res
-AA off (duh)
-turn physics off
-image quality low
-*model quality and model detail to 0
this is what has worked best for me and I average 50-55 fps with a gtx570 and i5 processor
Edit: at 1440x900 res
then go to mygames/companyofheroes2/configuration_system.lua
open it with notepad++
now you have full access to all graphic options
*means use the config file to change
best way to boost fps:
-*turn effects fidelity and density to 0
-*you can turn snow effects off by putting snow quality to 0, but this will remove all tracks
-turn off vsync
-lower res
-AA off (duh)
-turn physics off
-image quality low
-*model quality and model detail to 0
this is what has worked best for me and I average 50-55 fps with a gtx570 and i5 processor
Edit: at 1440x900 res
11 Jun 2013, 02:06 AM
#15
Posts: 48
I red some people on the official forum explaining some technical reasons behind this no sli/xfire support, telling it will never works.
Dana44 you got a Relic tag there, could you please clarify this ?
I just can't believe a 2013 game can't support multi gpu... Considering it runs like total crap, I may aswell cancel my preorder right now.
Dana44 you got a Relic tag there, could you please clarify this ?
I just can't believe a 2013 game can't support multi gpu... Considering it runs like total crap, I may aswell cancel my preorder right now.
11 Jun 2013, 02:18 AM
#16
Posts: 48
Quote | qduffy posted on Mar 27 2013 12:05 PM UTC
SLI/Crossfire - I checked with one of our Principal Programmers. There's no native SLI/Crossfire support planned. According to him, some of the snow tech requires techniques that go against the design of SLI/Crossfire.
Mmmmkay.
Waiting a few days for confirmation then canceling. What a shame...
2 users are browsing this thread:
2 guests
Livestreams
 |
|
|
45 | ||
|
|
|
|
16 | ||
|
|
|
|
10 | ||
 |
|
|
119 | ||
|
|
|
|
66 | ||
 |
|
|
6 | ||
|
|
|
|
5 | ||
|
|
|
|
3 | ||
|
|
|
|
2 | ||
 |
|
|
1 |
Ladders Top 10
-
#Steam AliasWL%Streak
- 1.655231.739+15
- 2.842223.791+5
- 3.943410.697+9
- 4.35459.857-1
- 5.599234.719+7
- 6.278108.720+29
- 7.655.929+6
- 8.307114.729+3
- 9.269143.653+2
- 10.10629.785+7
Data provided by
Relic Entertainment
Relic Entertainment
Replay highlight
VS
-
cblanco ★ -
보드카 중대
-
VonManteuffel -
Heartless Jäger
Einhoven Country
Honor it
11
Download
1266
Board Info
924 users are online:
924 guests
3 posts in the last 24h
13 posts in the last week
32 posts in the last month
13 posts in the last week
32 posts in the last month
Registered members: 50069
Welcome our newest member, king88reisen
Most online: 2043 users on 29 Oct 2023, 01:04 AM
Welcome our newest member, king88reisen
Most online: 2043 users on 29 Oct 2023, 01:04 AM